Lesson 3: Setting up your machine
Setup Checklist
Setup Checklist
- Insert the Tension Rod Socket
- Pull out the carriage rests
- Clamp the machine to a sturdy table
- Insert the tension rod
- Snap the tension guide on the tension rod
- Place the tensioner assembly on the top of the tension rod
- Attach the row counter
- Raise the carriage handle
- Position the carriage on the needlebed
- Confirm the carriage is seated correctly
- Pass it back and forth with and without needles in work
-
Practice removing the carriage using the carriage release lever.
Not sure where it is?
